Call  941-964-1361

All US MADE

USA

Just install our product and turn power on. It will be working for you! It's that easy to use.

*** Since 1984 *** Non-Contact Ultrasonic Tank Level Sensors with Digital Readout:

 

UL-1000 Ultrasonic Level Sensor monitors up to 9 tanks

UL – 1000

Monitors 1 tank, any size with virtually any liquid.

Digital readout shows level or volume in tank. Also 2 alarm relays, High and Low. Optional 3 or 4 relays, RS232C computer output and analog 4-20 mA output. No calibration required, just turn power on and it will work.

 

 

lp-10

LP – 10

Monitors 1 tank and Controls directly One or Two Pumps or Valves using Latching Relays.

High and Low alarm relays  activate if the pump or valve fail. Digital display shows level or volume of liquid in tank. Optional RS232C computer output and analog 4-20 mA output. Control is all digital, does not require calibration.

 

 

 

 

Non-Contact Level Sensor with Pump Aand Valve Control

UL – 100

Monitors 1 tank any size with virtually any liquid.

Ultra Sonic Sensor Transmitter with Digital readout of level or volume in tank, 4-20 mA or 1-5 VDC analog output. Optional RS232C computer output. No calibration.

 

 

 

 

sonix-1000

Sonix – 1000

Monitors up to 7 tanks of any size and shape, senses virtually any liquids.

Digital readout shows level and volume of each tank. Also alarm relays, analog output and RS232C computer output. No calibration or programming required. If you have 5 to 7 tanks on location, Sonix-1000 is most cost effective. If there are less than 5 tanks, use single-tank sensors below.

 

 

 

Sonix-1000 Ultrasonic Level Sensor monitors up to 7 tanks.

UC – 4000

Monitors up to 9 tanks of any size and shape, senses virtually any liquids.

Digital readout shows level and volume of each tank. Also alarm relays, analog output and RS232C computer output. No calibration or programming required. All preset for you, works as soon as power is turned on. If you have 6 to 9 tanks on location, UC-4000 is most cost effective tank level monitoring.

Analog Output Ultrasonic Level Transmitter, Plugged Chute/Hopper Monitor/Detector, Tank Level Switch:

Sonix-40 Ultrasonic Level Transmitter

Sonix – 40 and Sonix – 50

Ultrasonic Tank Level Transmitter

with 4-20 mA, 1-5 VDC or 0-5 VDC analog output, proportional to level or volume in tank. Switch calibration.

Sonix-40 Ultrasonic Level Transmitter

SoniGuard

Plugged Chute Monitor and Detector.

Ultrasonic Bulk Solids Level Control in Chutes and Hoppers. Flow/No Flow detection. Control High/Low level in bins and hoppers.

Sonix-11

Tank Level Switch

with two adjustable alarm relays to prevent overflow spills or turn motors On/Off.